Home
 
CAPSULE FILLING SYSTEM
Filliing capsules using a funnel
  • Ideal for small studies requiring few capsules to be filled.
  • Stainless Steel construction maintains high GMP and easy cleanup.
  • Fast & Accurate way to fill capsules.
  • Lightweight for use on analytical balance
1. Separate a single capsule. Place the capsule body in the holder. (Longer, narrower part) 2. Place the funnel over the capsule body in the holder. 3. Dose a pre-measured amount of powder into the capsule through the funnel, or put the assembly on a precision balance, tare it, and dose the powder into the capsule through the funnel.
4. When the required quantity of powder has been put into the funnel, use the tamper to compress filling material into capsule body. 5. Slowly remove the funnel. 6. Place the capsule’s cap onto the body of the capsule, pressing firmly to lock. Remove the filled capsule from the base.
Brochures
 


Brochure
Untitled Document

 

Home    Capsules Pharma.    Capsules Non-Pharma.    Capsule Machines    Bulletins & Size Charts    Ordering    E-Mail    Search    Site Map   Quick Tour Start   Pre-Clinical Use

We ship worldwide via courier (DHL, Fedex, UPS). Contact us for shipping charges. Pay in US$ or €.

Capsules, Fillers, Mixers & Molds. www.torpac.com & www.profiller.com

Torpac Inc., 333 Route 46, Fairfield, NJ 07004, USA
Tel: +1-973-244-1125 USA Eastern Time * Fax: +1-973-244-1365
Privacy Policy
Torpac Europe BV, Jan Camperstraat 19, 6416 SG Heerlen, The Netherlands
Tel: +31-6-30-93-65-27 GMT+ 1:00

ProFiller® & Torpac® are registered marks of Torpac Inc.
ProCoater™ - ProMixer™ - ProFunnel™ - ProTRM™ - ProMold™ are trademarks of Torpac Inc.
Terms of Use