1) Place capsules into tray.

2) Place tray on filler.

3) Check front knob is turned to the right.  Pull locking lever forward.

4) Push down long handle, lifts the caps off all the bodies.

5) Set aside the tray containing all the caps.

6) Push locking lever back, capsule bodies drop down and become level with filling surface.

7) Place powder tray on filler: keeps powder from spilling.

8) Pour & spread the pre-measured powder.  Move extra powder onto powder tray's shelf.

9) Lower tamper and lock.

10) Turn handle to compress powder: allows you to fill more powder in each capsule.

11) Raise tamper & spread extra powder from shelf into capsules: ensures uniform fill weights.

12) Return the tray containing caps to filler.

13) Turn front knob to the left and lower locking plate.  Engage lock for locking plate.

14) Hold tamper handle and push down on long handle.  Bodies are pushed up into caps: all the capsules are now locked in one step.

15) Disengage lock for locking plate.  Lift locking plate and turn front knob to the right.

16) Push down long handle and remove tray of completed capsules.

To continue, click the Back button on your browser.


 Home    Capsules Pharma.    Capsules Non-Pharma.    Capsule Machines    Bulletins & Size Charts    Ordering    E-Mail    Search    Site Map   Quick Tour Start   Pre-Clinical Use

We ship worldwide via courier (DHL, Fedex, UPS). Contact us for shipping charges. Pay in US$ or €.

Capsules, Fillers, Mixers & Molds. www.torpac.com & www.profiller.com
Tel: +1-973-244-1125 USA Eastern Time * Fax: +1-973-244-1365
Torpac Inc., 333 Route 46, Fairfield, NJ 07004, USA

2016© Torpac Inc.  All rights reserved.  Torpac® and ProFiller® are registered trademarks of Torpac Inc.